Tag Archives: wine cellar refrigeration units

How to Repair a Wine Storage Cooling Unit That is Leaking Freon

Written by Comments Off on How to Repair a Wine Storage Cooling Unit That is Leaking Freon

Licensed HVAC professionals are the only ones capable of providing quality services for wine cellar cooling equipment. Whether it’s installing, maintaining, or repairing a wine storage cooling system, an HVAC expert should be hired. A client from Irvine, California is a good example for other wine collectors to follow. When the client found that their wine room refrigeration unit was leaking refrigerant, they called M&M Cellar Systems for help.

Client in Irvine, Orange County Sought the Help of HVAC Technicians from M&M Cellar Systems

When a residential wine cellar owner in Irvine noticed that their cooling unit was leaking, they immediately called M&M Cellar Systems, a trusted wine storage cooling expert in California. A team of licensed HVAC professionals from the company went to the client’s residence to inspect the problem, and they found that their refrigeration system was leaking Freon.

Find them on FB!

This wine cooling unit in a residential wine cellar in Irvine, California was leaking Freon. A team of wine cooling technicians from M&M Cellar Systems went to repair the leak. Learn more about M&M Cellar Systems by checking them out on Facebook!

The HVAC Repair Team Located the Leak Site to Fix it

Generally, when a wine cellar cooling unit is leaking Freon, it does not stop functioning immediately. The damage is gradual, and that is why refrigerant leaks are not noticeable until the entire refrigeration system has finally broken down. With the Irvine client, their cooling unit was still functioning properly, but it was not going to continue to do so if the leak was not repaired immediately.

To repair the cooling unit properly, the HVAC team had to find the exact location of the leak first. The cooling specialists used the UV Light Leak Detection Method. In this procedure, the technicians injected a dye into the cooling system. The dye was allowed to circulate through the refrigeration unit for about a month, and exit through the leak sites with the refrigerant.

Through the leak detection procedure, the team found that the leak was located inside the wine storage climate control unit. To repair the hole, they had to disassemble the unit. Once they gained access to the leak, they applied a can of stop leak to seal the problem.

Recovering and Reusing the Lost Freon

There are two known solutions to fix Freon leaks. The first way is by replacing the entire evaporator coil. Although this is a common practice, it is very costly to perform. The alternative method, which is less expensive, is draining out the Freon, sealing the leak, and recycling the Freon into the cooling system.

In the Irvine refrigeration unit repair project, the cooling experts decided to remove the Freon from the climate control system and seal the leak. They also made sure that the recovered refrigerant was kept clean and away from contaminants so that they could reuse it. To seal the hole, the team applied a can of stop leak. When the problem was completely repaired, they added back the recycled refrigerant into the cooling unit.

When the HVAC technicians recovered and reused the refrigerant, they made sure that no Freon was released into the air. Freon is harmful to the environment. Studies show that it can cause damage to the atmosphere.

The team of refrigeration experts had to come back a month after the repair to evaluate the effectiveness of the stop leak. When they did, they found that the problem was successfully fixed, because no refrigerant was leaking anymore. Consequently, the client was satisfied with the team’s service.


Custom Wine Cellar Refrigeration Los Angeles – Service Call Refrigerant Leak – Part Four

Only a Licensed HVAC Specialist Should be Trusted with Your Wine Storage Cooling Unit

Find them on Google+

Wine cellar cooling experts from M&M Cellar Systems. The team inspected the leaking cooling unit in Irvine, and they repaired the problem promptly. Find a licensed HVAC professional today by contacting M&M Cellar Systems. Find them on Google + by clicking here!

Leak Detection in Wine Cellar Cooling Units

Written by Comments Off on Leak Detection in Wine Cellar Cooling Units

Find M&M Cellar Systems in Google Plus!

A team of HVAC experts from M&M Cellar Systems went to the residence of a wine storage owner in Irvine, Orange County. The team inspected the reported problem with the cellar’s cooling unit.

A recent repair project in Irvine, California for M&M Cellar Systems found a wine cellar cooling unit leaking refrigerant. The client was fortunate to have the leak repaired promptly, avoiding irreparable damage. This project demonstrates the importance of having a regular maintenance plan for your wine cellar refrigeration system to prevent problems like this.

M&M Cellar Systems HVAC Experts Detect Freon Leaking from a Cellar Cooling Unit

M&M Cellar Systems recently completed a repair project in Irvine, a city located prominently in Orange County, California. A client called for a team of HVAC professionals to fix their leaking wine cellar cooling equipment. Initially, the team had to determine where the leak was located exactly. Among the various methods of detecting Freon leak, the team used the Ultraviolet Light Leak Detection Method.

An HVAC technician injected a UV detectable dye into the cooling system. The dye was allowed to circulate thoroughly for a month. Then, he came back to check where the dye was exiting to identify the leak location. The leak was found inside the refrigeration unit.

The team had to completely disassemble the equipment to gain access to the problem and repair it accordingly.

3 Effective Methods of Refrigerant Leak Detection

M&M Cellar Systems on Yelp here!

The HVAC professionals used the UV Light Detection Method in locating the Freon leak in this Irvine wine cellar refrigeration equipment. Find M&M Cellars on Yelp by clicking here!

A wine cellar cooling unit cannot function properly without refrigerant. A refrigerant is the one responsible for creating the cool air that refrigeration units provide. Freon is one of the most popular refrigerants used in most cooling equipment.

Freon is a collective trade name for a number of compounds that are used as refrigerants in cooling units. When placed in room temperature, Freon turns to gas. It goes back to liquid form when placed in a cooler temperature or when compressed.

A refrigerant is a vital element of an effective wine cellar cooling system. If a refrigeration unit is losing refrigerant through a leak, it can gradually stop functioning. This is why it is necessary that you have a regular cooling system maintenance plan, so that you can detect problems with your equipment and be able to have it fixed immediately. Problems such as Freon leaks need to be detected early and repaired promptly; otherwise the damage could worsen and the repair could become more costly.

How to Know that the Wines in Your Wine Cellar Have Gone Bad

Written by Comments Off on How to Know that the Wines in Your Wine Cellar Have Gone Bad

Wines need an effective wine storage space in order to be kept safe. Without an effective wine storage solution, wine will go bad, and must be thrown away. This cannot be allowed to happen; after all, wine does not come cheap. Here are some things check for to find out whether your wines have gone bad or not.

The Two Most Common Causes of Wine Going Bad in a Wine Cellar

There are many things that can cause your wines to become tainted or spoiled. The two most common are: cork taint and oxidation.

1. Cork Taint.

Cork tainting is the wine’s cork being contaminated prior to bottling. More specifically, the wine cork is contaminated by TCA, a type of bacteria that lives in cork. It is important to take note that this has nothing to do with the little bits of floating cork in wine. Rather, a wine cork with an excessive amount of TCA is what will contaminate and consequently spoil wine. The term “corked” refers to spoiled wine.

2. Oxidation.

Oxidation is a process that occurs when wine is overexposed to air. More specifically,wine compounds react to the oxygen in the air. The most common cause of oxidation in wine is improper wine storage. This is why it is very important to invest in a reliable residential custom wine cellar so that wines can properly be stored.

Cues that Indicate that the Wine in Your Wine Cellar is Spoiled

There are a few cues that you can look for to see if your wines have gone bad. To search for these cues, here are somethings that you can do:

1. Observe Its Appearance.

Simply check the appearance of your wine to gain an idea of whether it is still good, or if it is spoiled. Bad wine loses its brightness and takes on a brown hue. A bottle of red wine that has turned brown in color is either old or tainted. If a bottle of white wine has turned deep yellow in color, it has most likely oxidized.

Besides the color, observe also the wine cork. If the cork has slightly pushed out from the bottle, it maybe an indication that the wine has overheated and expanded within the bottle.

2. Smell the Wine.

This is one of the quickest ways to check for spoilage. If your wine smells moldy or musty, it has most likely been spoiled. If your wine smells like sherry and it isn’t sherry, it has probably gone bad. Other scents that can indicate spoilage are stewed fruit,and/or a heavy raisin smell. If you detect a strong vinegar or sulfur smell,similar to rotten eggs, this is a sure sign that the wine has gone bad.

Understanding What Wine Cellar Cooling Units Are

Written by Comments Off on Understanding What Wine Cellar Cooling Units Are

A wine cellar refrigeration system is an integral part of a wine storage solution. It is responsible for providing the cool temperature and humidity to wines inside a wine storage room,so that they can age and develop properly. Without a good cooling system installed, a wine cellar will be rendered useless.

What is a Wine Cellar Cooling Unit?

A wine cellar cooling unit is similar to a regular air conditioning unit, but not quite the same. A wine cellar cooling system is specifically built to cater to the wine storage needs of wine cellars. Only a wine cellar cooling unit can provide the specific temperature and humidity levels that wines need to develop their aromas and flavors. At its core, a wine cellar refrigeration system is an air exchanger. It basically provides cool air to a wine cellar, while removing the warm air that rises to the top and sending it into an exhaust room.

 

Basic Elements of a Good Wine Cellar Refrigeration System

Wine cellar refrigeration systems in Vancouver, Canada come in various shapes, sizes and configurations. It can be really difficult to determine which brand is best fit for your wine storage room.To make it easier to choose the right wine cellar cooling system, here are the standard requirements of a quality wine cellar cooling unit:

1. A Good Wine Cellar Cooling Unit is Durable.

It is imperative that your wine cellar cooling unit in Vancouver, Canada, has a long lifespan. Generally, the longer the lifespan of a refrigeration system, the more expensive it is. Wine cellar cooling systems that are on the lower end of the market usually last around 1 to 4 years, but there are a few that are known to last longer when used under the ideal conditions. High quality wine cellar refrigeration units can last from 5 to 7 years, with some brands lasting even longer.

2. Choose Wine Cellar Cooling Units That Produce Minimal Noise

A wine cellar cooling unit is the most common source of noise in a wine storage room. The problem with noise is that, if it is excessive, it can cause vibrations in the wine racks and there by disturb the aging and development process of the wines. The amount of noise that a wine cellar cooling unit produces depends on its quality and on how it is configured. Some types of cooling units produce minimal noise, while others are very noisy.

3. Your Cellar Refrigeration Unit Should Be Efficient

The efficiency of a wine cellar refrigeration system is essential. How does the cooling unit perform the task at hand? There are cooling units that can cool a room to the ideal temperature, but cannot maintain it for very long. Some cooling units have trouble functioning should the outside temperature become too warm or too cold. There are also some refrigeration units that have a problem with temperature uniformity, producing cooler and warmer spots through the custom wine cellar.

Many times, the design and construction of the wine cellar play a large role in how well the wine cellar refrigeration system functions. If a wine cellar is not properly insulated, and if it isn’t completely air tight, a wine cellar cooling unit will fail to function effectively. Also, if you install a cooling unit that is too small for a large wine storage room, the unit will fail to do its job properly, and can even be damaged.

Types of Wine Cellar Cooling Systems in Vancouver, Canada

There are various types of wine cellar cooling units in Vancouver, Canada, but they can be categorized into two basic kinds.

1. Self-Contained Wine Cellar Cooling Systems

A self-contained wine cellar cooling unit has both the evaporator and condenser contained in one single housing. There are two subtypes of self-contained wine cellar cooling units and they are:

a. Ductless Self-Contained Wine Cellar Cooling Units

This is the easiest to install, because you simply mount the cooling unit through the wall of the home wine cellar. An HVAC professional is not needed for the installation of this unit. The major advantage of ductless self-contained wine cellar cooling systems is that they are very cost-effective. The common complaint for this kind of cooling system is that it produces a lot of noise in the wine storage room.

Clean and Sleek Contemporary Vancouver Custom Wine Cellar

Written by Comments Off on Clean and Sleek Contemporary Vancouver Custom Wine Cellar

When building a custom wine cellar, every client has his storage and aesthetic requirements. There are essential factors for would-be wine cellar owners that must be discussed and taken into consideration during the planning stage, including the location where the wine room will be built, size of the collection, types of bottles and wines to be stored, existing home décor, and budget. The final look and ambiance of the wine cellar must not be overlooked either.

Blue Grouse Wine Cellars has always used its experience and expertise in designing and building Vancouver custom wine cellars to exceed the expectations of its clients.

Let’s talk about one of the projects they have completed with excellence.

The Glass Custom Wine Cellar West Vancouver

Blue Grouse’s client in Vancouver, Canada love to socialize and entertain friends which is one of the reasons they decided to invest in a residential wine cellar.

Their desire was to add a focal point to their residence that could impress guests and allow them to create a memorable wine drinking experience. The Blue Grouse Wine Cellars team achieved this by constructing an all-glass custom wine display.